Photos of K3 with various knobs for A and B VFO's

[T Gahagan]

Several of you wanted a photo of the K2 knob being used as the K3 B-VFO knob.  Here's the link and thanks to Don, WB8YQJ for posting the photos.

Todd, WA7U


http://www.zerobeat.net/mediawiki/index.php/SpotLight_on_K3
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[K2QI]

That Kenwood weighted knob from WA7U looks like an almost perfect fit.  Was
the shaft OD on the Kenwood's VFO similar to the K3?

73,
James KC2UEE



-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of T Gahagan
Sent: Sunday, March 08, 2009 6:19 PM
To: Elecraft List
Subject: [Elecraft] Photos of K3 with various knobs for A and B VFO's

Several of you wanted a photo of the K2 knob being used as the K3 B-VFO
knob.  Here's the link and thanks to Don, WB8YQJ for posting the photos.

Todd, WA7U


http://www.zerobeat.net/mediawiki/index.php/SpotLight_on_K3
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[T Gahagan]

Hi James,

The Kenwood knob needed to be machined slightly to fit the nut holding the
encoder in the front panel and the hole was drilled slightly larger to
accommodate the K3 encoder shaft.

Todd, WA7U

----- Original Message -----
From: "James Sarte" <[hidden email]>
To: "'T Gahagan'" <[hidden email]>; "'Elecraft List'"
<[hidden email]>
Sent: Sunday, March 08, 2009 4:59 PM
Subject: RE: [Elecraft] Photos of K3 with various knobs for A and B VFO's

> That Kenwood weighted knob from WA7U looks like an almost perfect fit.
> Was
> the shaft OD on the Kenwood's VFO similar to the K3?
>
> 73,
> James KC2UEE
>
>
>
> -----Original Message-----
> From: [hidden email]
> [mailto:[hidden email]] On Behalf Of T Gahagan
> Sent: Sunday, March 08, 2009 6:19 PM
> To: Elecraft List
> Subject: [Elecraft] Photos of K3 with various knobs for A and B VFO's
>
> Several of you wanted a photo of the K2 knob being used as the K3 B-VFO
> knob.  Here's the link and thanks to Don, WB8YQJ for posting the photos.
>
> Todd, WA7U
>
>
> http://www.zerobeat.net/mediawiki/index.php/SpotLight_on_K3
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html