Please observe...

[John Ragle]

Don...

I wrote: "*...a tiny surface-mount component, which is itself mounted on
a small circuit board...*"

On my SSB board, the "small circuit board" had to be wired in place with
short pigtail leads cut from resistors...these pigtail leads themselves
had to be soldered onto very small pads...perhaps the situation has
changed from that of 2 years (+) ago, but in my case, that was the only
complicating feature of the SSB board (as I think I stated quite clearly
in my post).

Have a fine, healthy, and interesting New Year and many more to
follow...and many thanks for the help rendered me in the past.

John Ragle -- W1ZI


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

  John,

That may have been true 2 years ago, but it is now pre-mounted on the board.

73,
Don W3FPR

On 1/1/2011 10:59 AM, John Ragle wrote:

> Don...
>
> I wrote: "*...a tiny surface-mount component, which is itself mounted
> on a small circuit board...*"
>
> On my SSB board, the "small circuit board" had to be wired in place
> with short pigtail leads cut from resistors...these pigtail leads
> themselves had to be soldered onto very small pads...perhaps the
> situation has changed from that of 2 years (+) ago, but in my case,
> that was the only complicating feature of the SSB board (as I think I
> stated quite clearly in my post).
>
> Have a fine, healthy, and interesting New Year and many more to
> follow...and many thanks for the help rendered me in the past.
>
> John Ragle -- W1ZI
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html