Power for P3.

[John-2]

I am using PR6 with my K3 and power for it is supplied via the RCA 12 VDC out on the back of the K3.
Where may I supply the P3 power from the K3?  Do I need another power supply for the P3?
Thanks
John.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Harlan Sherriff]

John
Power the P3 from the same supply the K3 is powered from.
Harlan
NC3C

Sent from my Verizon Wireless 4G LTE DROID

John <[hidden email]> wrote:

>I am using PR6 with my K3 and power for it is supplied via the RCA 12 VDC out on the back of the K3.
>Where may I supply the P3 power from the K3?  Do I need another power supply for the P3?
>Thanks
>John.
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:[hidden email]
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[M0XDF]

You could build a relay box, fed from the Aux out and feed the PR6 & the P3 from that, the power for the relay box would need to come from the same PSU that is powering the K3 or a different PSU - but turning the K3 on would power up the other units
73 de David, M0XDF
--
It is unwise to be too sure of one's own wisdom. It is healthy to be
reminded that the strongest might weaken and the wisest might err.
-Mohandas K. Gandhi (1869-1948)

On 17 Aug 2013, at 22:28, John wrote:

> I am using PR6 with my K3 and power for it is supplied via the RCA 12 VDC out on the back of the K3.
> Where may I supply the P3 power from the K3?  Do I need another power supply for the P3?
> Thanks
> John.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Mike Reublin]

John,

I have them both plugged into the 12V RCA jack using a "Y" adapter. No problem so far.

73,
Mike NF4L

On Aug 17, 2013, at 5:28 PM, "John" <[hidden email]> wrote:

> I am using PR6 with my K3 and power for it is supplied via the RCA 12 VDC out on the back of the K3.
> Where may I supply the P3 power from the K3?  Do I need another power supply for the P3?
> Thanks
> John.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html