Power level by mode?

[Dick Roth]

Greetings--

I'm trying to figure out whether its possible to set up power levels to
change as I change the mode.  It would be very handy to have a lower
power automatically selected when changing to CW and a higher power
level selected when going to SSB.  Is this possible?  I couldn't see
anything in the manual that was encouraging.

Thanks for any help
--
73 de Dick, ka1oz
Elecraft K3/100
GAP Titan-DX Antenna

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Pierfrancesco Caci]

On Tue, 12 Jul 2011 00:42:56 -0400
Dick Roth <[hidden email]> wrote:

> Greetings--
>
> I'm trying to figure out whether its possible to set up power levels
> to change as I change the mode.  It would be very handy to have a
> lower power automatically selected when changing to CW and a higher
> power level selected when going to SSB.  Is this possible?  I
> couldn't see anything in the manual that was encouraging.

I don't think it's possible, I too would love to be able to change to
low power when using data mode, and back to full when using voice/cw.  
I ended up programming M4 to switch to 40 W on tap and to 100 W on
hold.

Pf

--
Pierfrancesco Caci, ik5pvx <[hidden email]>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html