|
|
Working in the 10m contest I noticed that K3 used some 25A of current. After the calibration, teh following happens:
After a new calibration
Pwr/K2 PWR/LP-100 Curent
70 58 12A-stable
100 80 15A-stable
120 90 20A-up
At 120W set, the power increases in 1 second to 25A and the radio resets to low power. When the current increases, the output power stays the same.
It seems that other bands are no problem.For example, on 160 teh power is set to 120, LP-100 shows 119W, and the current is 16A stable.
Ignacy, NO9E
|
Locked
