Power settings

[Ian Westerland]

Hi!  I run my K3 on 100 Watts on HF bands.  When I switch to 2 meters
the power changes to around 10 Watts but doesn't revert to the 100
setting when I go back toHF.  Should the power level change back and
if not, what setting do I need to change?  My speach output is not
giving me quite enough information to know what to do.

73 to all.



Ian Westerland,  VK3vin  

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Vic Rosenthal]

Check that you have CONFIG:PWR SET to PER BAND. Not sure, because I don't have a transverter.

Vic 4X6GP/K2VCO

> On May 15, 2015, at 12:43 PM, Ian Westerland <[hidden email]> wrote:
>
> Hi!  I run my K3 on 100 Watts on HF bands.  When I switch to 2 meters the power changes to around 10 Watts but doesn't revert to the 100 setting when I go back toHF.  Should the power level change back and if not, what setting do I need to change?  My speach output is not giving me quite enough information to know what to do.
>
> 73 to all.
>
>
>
> Ian Westerland,  VK3vin  
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Pierfrancesco Caci]

>>>>> "Ian" == Ian Westerland <[hidden email]> writes:


    Ian> Hi!  I run my K3 on 100 Watts on HF bands.  When I switch to 2 meters
    Ian> the power changes to around 10 Watts but doesn't revert to the 100
    Ian> setting when I go back toHF.  Should the power level change back and
    Ian> if not, what setting do I need to change?  My speach output is not
    Ian> giving me quite enough information to know what to do.

You can have the radio save power levels per band. Check "PWR SET" in
the config menu.

--
Pierfrancesco Caci, ik5pvx
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]