Thanks to the several who responded to my earlier question as to what
is needed to make the above function in digital modes. I tried to
answer each one who responded off of the reflector, but some have
been bounced, so I hope that you will hear this way.
I finally got it figured out. I had to install a second USB-Serial
adapter on my Powerbook and connect it to the Rigblaster serial port,
leaving my KIO2 cable on another USB-Serial adapter and connected to
the KIO2 port on the K2. I now transmit fine on cocoaModem (what a
nice program). Likely a part of my confusion was the lack of ports
available on the laptop. USB hubs save the day.
Thanks again for your reply.
73
Slater VE5OA
Wolseley, SK Canada
K2 - 4519
If there is a glaring error in the above, please let me know.
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
