Pre 2 not avail on 10 meters?

[Nr4c]

It works as it should on 12 and 6 meters but on 10 meters pressing PRE shows Pre1 then OFF then Pre1 them OFF. Anyone else have this happen?

FW is 5.33  - d1 is 2.86 - d2 is 2.86 - Fl is1.23 and dr is 1.03.

Sent from my iPhone
...nr4c. bill

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Michael Eberle]

Make sure you have PREAMP2 in the Config menu set to 'ON' on 10 meters.  
It is set on a per band basis.

Mike - KI0HA


On 8/17/2015 3:01 PM, Nr4c wrote:
> It works as it should on 12 and 6 meters but on 10 meters pressing PRE shows Pre1 then OFF then Pre1 them OFF. Anyone else have this happen?
>
> FW is 5.33  - d1 is 2.86 - d2 is 2.86 - Fl is1.23 and dr is 1.03.
>
> Sent from my iPhone
> ...nr4c. bill
>
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]