Problem on Linux Elecraft K3 Utility.

[David Quental]

Hello all,

when I try to edit CW Memories I get this:

An exception of class OutOfBoundsException was not handled. The
application must shut down.

If I hit OK utility goes out.

Any help will be welcome here.

Best 73.

CT1DRB
David Quental

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[AD4C2009]

 
I am not going to writte again about the K3,its enough said in this site but this time there is something I want to say about Elecraft technical support.
A week ago by mistake I plug a mono plug at the speakers stereo jack at the rear without changing the config menu to "1" to avoy shorting out the stereo output of RX PA,so in less than a second I blew up that IC,next day called Elecraft,talked to Dale one of their tecs,and he sent me a new DSP board and charged me just the cost of the PA IC plus shiping to FL,bill was ONLY $14 USD,could you imagine if that happened to any of the JA radio brands? you surely will have to ship it to the depo to be repaired with a cost of about $200 among shiping,parts and labor,but because we are using an Elecraft radio from a company that definitively has the BEST technical support in this world,in just 2 days I had a brand new upgraded DSP board and with the help of my good friend Julio AD4Z who put together his K3 and knows more than me about assembly,last night my K3 was up and running even better than before.
This is something to take in count when making your mind to buy a new radio.This is the one to have,thanks again to Elecraft,a great team of hams who work for hams.73 to all


AD4C
Lake Worth,FL
K3 # 2192


     
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[alsopb]

Perhaps you were unaware of this mod:
http://www.elecraft.com/K3/mods/AF_Output_Mod_Rev_C.pdf

I believe that it was specifically designed to protect against what you
did for pre DEC '08 K3's.

Is your's this old?

It would be nice to know if this mod did not work for a newer K3.

73 de Brian/K3KO

Hector Padron wrote:

>
>
>
>
>
>
>  
> I am not going to writte again about the K3,its enough said in this site but this time there is something I want to say about Elecraft technical support.
> A week ago by mistake I plug a mono plug at the speakers stereo jack at the rear without changing the config menu to "1" to avoy shorting out the stereo output of RX PA,so in less than a second I blew up that IC,next day called Elecraft,talked to Dale one of their tecs,and he sent me a new DSP board and charged me just the cost of the PA IC plus shiping to FL,bill was ONLY $14 USD,could you imagine if that happened to any of the JA radio brands? you surely will have to ship it to the depo to be repaired with a cost of about $200 among shiping,parts and labor,but because we are using an Elecraft radio from a company that definitively has the BEST technical support in this world,in just 2 days I had a brand new upgraded DSP board and with the help of my good friend Julio AD4Z who put together his K3 and knows more than me about assembly,last night my K3 was up and running even better than before.
> This is something to take in count when making your mind to buy a new radio.This is the one to have,thanks again to Elecraft,a great team of hams who work for hams.73 to all
>
>
> AD4C
> Lake Worth,FL
> K3 # 2192
>
>
>      
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[N7US]

I agree with our good fortune in having such a responsive manufacturer that
provides such excellent support.

Addressing the specific issue of damage caused by inadvertently inserting a
mono plug instead of a stereo one, is it feasible to develop a circuit
modification that would eliminate the problem?

Jim N7US



-----Original Message-----
 
A week ago by mistake I plug a mono plug at the speaker's stereo jack at the
rear without changing the config menu to "1" to avoid shorting out the
stereo output of RX PA, so in less than a second I blew up that IC.

AD4C


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[N7US]

Oops, I didn't realize that it had been fixed in January 2009.

Jim N7US



-----Original Message-----

I agree with our good fortune in having such a responsive manufacturer that
provides such excellent support.

Addressing the specific issue of damage caused by inadvertently inserting a
mono plug instead of a stereo one, is it feasible to develop a circuit
modification that would eliminate the problem?

Jim N7US


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html