I have band memories set up for each band 1.8 thru 50 on key pads 1 thru 0.
Further I have discrete in band frequencies/ modes in M1 thru M4.
A recently noticed issue has been that sometimes the double beep stops
working when I press M>VFO and 1 thru zero ( to call up a band) and then M>V
M>M1 to M4 to call up an in band frequency and all I get is the first beep
tone.
The way round it is that I have to play one of the M1 to M4 voice memories
after which the two beep functionality returns except for keypad 2 which
never has a second beep (and it has no beep at all ever if I press it to
activate the REV function).
The double beep failure always occurs after I use one of the M1 to M4 cw
memories but also some other apparently random times as well. The only way
to then restore it to the double beep is to use one of the M1 to M4 voice
memories.
Has anyone else noticed this problem and is there a cure ?
Barry Simpson VK2BJ
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
