Problems with receiving and tranmitted signals on 2 meters

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

Problems with receiving and tranmitted signals on 2 meters

Larry-2
We gave a new k3 with the 2 meter module built in. When listening and transmitting on 2 meters, our signal is not clear. We have tried several things to correct the problem, but it is still present. We gave removed and checked for bad cables, etc. but to no avail. The problem seems to now be in the K3 system.  Any suggestions? Best. k4mwe.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: Problems with receiving and tranmitted signals on 2 meters

N5GE-2

What do mean when you say the signals are not clear?

Are they distorted?  Are they weak?  Are they off frequency?

Try a more specific description of what you mean by "not clear".

Also, describe what "several things" means.  Tell us what those things are that
you tried.

Did you install the 2m module or was it a factory install?  Are you trying to
use a vertical antenna for 2m SSB?  What mode are you using?

We can help you with the problem if you will be more specific in your
description.

73,
Tom
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member


"Only the white eyes would believe they could cut the top
off a blanket, sew it to the bottom and have a longer
blanket."
-- American Indian comment about Daylight Saving Time --


On Sun, 22 Apr 2012 08:04:44 -0400, "Larry" <[hidden email]> wrote:

>We gave a new k3 with the 2 meter module built in. When listening and transmitting on 2 meters, our signal is not clear. We have tried several things to correct the problem, but it is still present. We gave removed and checked for bad cables, etc. but to no avail. The problem seems to now be in the K3 system.  Any suggestions? Best. k4mwe.
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:[hidden email]
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: Problems with receiving and tranmitted signals on 2 meters

w0mu
FM or SSB or CW?  Are you transmitting and listening on the right
filters?  Is the NB on?  NR on?

Mike W0MU

W0MU-1 CC Cluster w0mu.net


On 4/22/2012 9:22 AM, N5GE wrote:

> What do mean when you say the signals are not clear?
>
> Are they distorted?  Are they weak?  Are they off frequency?
>
> Try a more specific description of what you mean by "not clear".
>
> Also, describe what "several things" means.  Tell us what those things are that
> you tried.
>
> Did you install the 2m module or was it a factory install?  Are you trying to
> use a vertical antenna for 2m SSB?  What mode are you using?
>
> We can help you with the problem if you will be more specific in your
> description.
>
> 73,
> Tom
> Amateur Radio Operator N5GE
> ARRL Lifetime Member
> QCWA Lifetime Member
>
>
> "Only the white eyes would believe they could cut the top
> off a blanket, sew it to the bottom and have a longer
> blanket."
> -- American Indian comment about Daylight Saving Time --
>
>
> On Sun, 22 Apr 2012 08:04:44 -0400, "Larry"<[hidden email]>  wrote:
>
>> We gave a new k3 with the 2 meter module built in. When listening and transmitting on 2 meters, our signal is not clear. We have tried several things to correct the problem, but it is still present. We gave removed and checked for bad cables, etc. but to no avail. The problem seems to now be in the K3 system.  Any suggestions? Best. k4mwe.
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
> Amateur Radio Operator N5GE
> ARRL Lifetime Member
> QCWA Lifetime Member
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html