Steve,
Is this a separate KIO2 option, or are you referring to the RS-232
function on the KPA100?
If it is the KIO2 option, I can give you some tests that can be used
with DC signals and a DMM - unfortunately the same scheme does not work
with the KPA100, and the easiest way to troubleshoot it is to use an
oscilloscope.
73,
Don W3FPR
On 7/2/2012 5:00 PM, Stephen Roberts wrote:
> I just purchased a KPA100 from someone on the list and got it installed and working fine, but I can't seem to get the KI02 going. I'm using a Mac and Aether software. I set everything correctly in the software and nothing. I tried Mac logger deluxe and the same result. Checked the KUSB cable that I got from Elecraft as well as the cable I built that came with the KI02 kit and they check out ok. What should be next on my list of things to check?
>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
