Lee,
Those commands are in the programmer's reference (i.e., you simulate
button pushes or button holds). You should send a K31 command first, to
allow the button commands to work.
I'm planning to do this in ARRL Phone this weekend from P49Y using my
software, CQPWIN. I ended up having to devise a process to test the
messages to see how long they were (to allow times repeating from software),
and also to allow a deduction in the timing for the normal reaction time in
pressing the buttons, since the messages stop and start with button presses,
not with voice actuation. But it seems to work pretty well. Email me off
line if you want more info.
73,andy, ae6y
----- Original Message -----
From: "Iain MacDonnell - N6ML" <
[hidden email]>
To: "Lee Imber" <
[hidden email]>
Cc: <
[hidden email]>
Sent: Monday, March 02, 2009 10:34 AM
Subject: Re: [Elecraft] [K3] Programmers reference for KDVR3?
>
>
> Lee Imber wrote:
>> Hi,
>>
>> I am trying to test calling the internal K3 DVR from software.
>>
>> I can't seem to find reference to this in the programmers guide. Am I
>> just
>> missing it?
>>
>> If not, any hints on the commands to call M1-M4?
>>
>> I would love to be able to call my pre canned SSB recordings for ARRL DX
>> SSB.
>
> You could use "SWT" - e.g. "SWT21;" is the same as tapping M1.
>
> ~Iain / N6ML
>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
