Prosign "IM" to end K3 RTTY idle not working

[John Stasiw]

In using a paddle  for CW-to-DATA operation I have found the prosign "IM" does not halt idle after one second but just enables the idle to continue to runout for an additional 4 seconds.
Any thoughts on the problem would be appreciated.
73
John Stasiw
VE6GJ
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Rick Prather-2]

John,  

Are sending that as a single character instead of I M?

If all else fails a tap of the REC button also will stop it.

Rick
K6LE


On 12/2/2011, at 2:50 , John Stasiw wrote:

> In using a paddle  for CW-to-DATA operation I have found the prosign "IM" does not halt idle after one second but just enables the idle to continue to runout for an additional 4 seconds.
> Any thoughts on the problem would be appreciated.
> 73
> John Stasiw
> VE6GJ
> ____________________________
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html