Take a look at the Digital Interface box for the K2 on my website
http://w3fpr.qrpradio.com and perhaps you can find some ideas. The
interfacing is not hard as long as you don't want extra 'whiz-bang'
features that are included with the commercial models.
Also while at my website, take a look at the K2 Fixed Audio output. If
you find that desirable, Tom Hammond has boards that will allow you to
mount it between the front panel and the control board. See
www.n0ss.net for more information on the fixed audio boards.
With the fixed audio piped to a spare pin on your microphone jack and
the interface box, you can have just one cable to the K2 microphone jack
for all your soundcard generated data modes.
73,
Don W3FPR
Yves Dussault wrote:
> I would like suggestions on interfacing the K2 and suggestions...
>
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG.
> Version: 8.0.100 / Virus Database: 269.24.3/1472 - Release Date: 5/29/2008 7:27 AM
>
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
