Wayne …. I
know that you are still working on the code to allow the SUB Receiver to tune a
different Band than the MAIN Receiver.
I will be using a K3 on 6M with two antennas connected to
ANT-1 and ANT-2 – one a Yagi and the other Horizontal Loop.
Sometimes both receivers will be used with the two 6M antennas.
The K3 will be also be used with a XV-144 Transverter.
At other times I’d like to use the Main Receiver on 6M, while monitoring
2M with the SUB Receiver. The only way I can see to have the XV-144
Receiver Active – while also being able to Transmit immediately –
is to connect the XV-144 to the Transverter Input and Output. However
these are only activated (I think) when the appropriate CONFIG item has been
set to add the Transverter to the Band Up / Down Selector.
My question is whether there’s any way it will be
possible to have 6M on one Receiver, and 2M on the other? It’s not
obvious to me which is why I decided to ask.
73---->Dave, W9ZRX
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
