Question about K3: ATU function

[tomb18]

Hi,

Second question: Does one need to press the ATU tune button at each frequency of use?  What happens if you forget?  Will the K3 automatically try to tune?

Thanks

[AC7AC]

CONTENTS DELETED

The author has deleted this message.

[Gary Gregory]

You will see 'ATU' flash when you TX if the swr is high enough and the ATU
will settle on an existing memory.

Well at least mine does...:-)

Gary

On 26 June 2011 06:04, Ron D'Eau Claire <[hidden email]> wrote:

> The ATU requires you to tell it to tune by tapping the ATU TUNE switch.
>
> Keep in mind that a 1:1 SWR is pretty meaningless. You won't see any
> degradation in your signal if your SWR is 1.5:1 or even 2:1.
>
> How far you can QSY before the SWR is an issue depends entirely on your
> antenna system. The KAT3 ATU retains up to 30 frequencies in each band in
> memory, so you only need to let it cycle looking for best match once in
> each
> frequency range (unless you change your antenna). After that when you tap
> ATU TUNE it will instantly switch to the memorized settings for that
> frequency.
>
> If you forget to do the initial tune or something in your antenna setup
> changes, you'll see your SWR is high. Excessive SWR over time will trigger
> an error message at the K3 - either HIGH SWR or EXCESSIVE CURRENT (since
> transmitting into poor match will cause the PA current to rise). Tap the
> ATU
> TUNE switch to retune.
>
> See "Transmit, ATU, and Antenna Controls" in your Owner's manual Quick
> Start
> Guide (pg 6 in the Rev 9 manual) for more details.
>
> Ron AC7AC
>
>
>
> -----Original Message-----
> From: [hidden email]
> [mailto:[hidden email]] On Behalf Of tomb18
> Sent: Saturday, June 25, 2011 11:59 AM
> To: [hidden email]
> Subject: [Elecraft] Question about K3: ATU function
>
> Hi,
>
> Second question: Does one need to press the ATU tune button at each
> frequency of use?  What happens if you forget?  Will the K3 automatically
> try to tune?
>
> Thanks
>
> --
> View this message in context:
>
> http://elecraft.365791.n2.nabble.com/Question-about-K3-ATU-function-tp651552
> 5p6515525.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

--

VK4FD - Motorhome Mobile
Elecraft Equipment
K3 #679, KPA-500 #018
Living the dream!!!
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[AC7AC]

CONTENTS DELETED

The author has deleted this message.