Question about K3 vfo's.

[nz8j]

Is it possible to set the vfo's on the K3 to different bandwidth while
operating split? For example can you set the pileup listening vfo (b) to
a 1khz or wider bandwidth while listening to the dx station on the other
vfo (a) with say a 500 hz filter?  I understand if you have the sub
receiver this is possible, but I cannot find anywhere that specifically
addresses just the two vfo's.
Thanks
Tim
Nz8J
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Vic K2VCO]

NZ8J wrote:
> Is it possible to set the vfo's on the K3 to different bandwidth while
> operating split? For example can you set the pileup listening vfo (b) to
> a 1khz or wider bandwidth while listening to the dx station on the other
> vfo (a) with say a 500 hz filter?  I understand if you have the sub
> receiver this is possible, but I cannot find anywhere that specifically
> addresses just the two vfo's.

Yes, you can either set a wide bandwidth, do A->B and then narrow the
bandwidth on A, or you can use BSET to set whatever bandwidth you want
on B. I find this quite useful.
--
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[nz8j]

Thanks to all who responded, it looks like it will do what I want it to
do..Tim NZ8J

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of NZ8J
Sent: Wednesday, May 14, 2008 6:06 PM
To: [hidden email]
Subject: [Elecraft] Question about K3 vfo's.


Is it possible to set the vfo's on the K3 to different bandwidth while
operating split? For example can you set the pileup listening vfo (b) to
a 1khz or wider bandwidth while listening to the dx station on the other
vfo (a) with say a 500 hz filter?  I understand if you have the sub
receiver this is possible, but I cannot find anywhere that specifically
addresses just the two vfo's. Thanks
Tim
Nz8J
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com