Question on K3 and LP-PAN

[w0ih]

In looking at the LP-PAN and the connections, and what I've seen on the Flex radios, if you connect up an LP-PAN to the K3, the receive signals that you hear through the computer sound card output would NOT be going through the K3 roofing filters.

The LP-PAN would of course give you the spectrum display, but not the signal processing from the K3.
  Any signals that come through the computer would be internally (to the computer) generated.

Therefore, if you wanted to use the K3 system filters, you need to go through the K3 audio output.

Is this true?

Mike
  W0IH

[Gary Dezern]

Yes.  Mostly. ;)  

The pre-amp and attenuator happens, I think, BEFORE the IF that goes into the LP-PAN (or P3.)  

On Aug 16, 2010, at 7:45 PM, w0ih wrote:
>
> Therefore, if you wanted to use the K3 system filters, you need to go
> through the K3 audio output.
>
> Is this true?
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html