Question on using the XV50 with a K2

[DW Holtman]

Hello,

I have a couple of questions I hope someone can help me with. My XV50 is almost built. I have not put power to it yet.

Reading the Owners Manual I don't really understand the best way to hook up both an HF and a 6 Meter antenna. I do not have the K60XV. It says that the Transverter turns on when the Band+ or the Band- are selected. I assume this means the XV50 will turn on when 10 meters is selected with the K2? What If I wanted to operate 10 Meters? Do I turn the XV50 off manually?

The manual stated not to use an antenna relay to switch between an HF and the 6 Meter antenna? I guess this also includes a manual antenna switch which are more lossy than a good quality antenna relay? What option is left, unscrewing the antenna at the back of the K2 when operating HF?

How are some others using the XV50 with a K2. I'm also going to wire in a KAT100 and my K2 has the 100 watt option.

Thank you in advance for any help.

Best,
DW Holtman
WB7SSN
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[AC7AC]

CONTENTS DELETED

The author has deleted this message.