RE: ECN

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

RE: ECN

Albers-2
Quite a bit of QRN here, too, Kevin.

Well, here I am again in NC - spent some time Fri and Sat working on antenna setup at our no-outside-antennas NC second home. My attempt at loading the aluminum ridge vent came to naught (more on that another time). Current configuration is an ATU at one end of the attic with a balun and 25 ft of fat wire stretched out inside the attic and 25 ft of very thin black wire - very, very hard to see - stretched outside the attic.

Was anxious to try it on ECN but at 20m net time I was still paying the bill for a little family supper at Elmo's diner.

Fired up the KX-1 in time for the 40m net - heard Tom (about 579) tell Kevin (about 339) about the storms. Heard W0CZ about 589 w/QSB, VE3XL about 569, K2VCO, K4JPN, all Q5 but weaker. Heard AB8KJ 589 but a bit off freq. Tried calling a couple of times in hope someone would hear me and relay, but no such luck. Hope to QNI next week when I'm back in VA with a real antenna!
73
Ray K2HYD
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply | Threaded
Open this post in threaded view
|

Re: RE: ECN

Kenneth Moorman
Ray,

What kind of ATU are you using to do this?  I tried to send this directly to
you, but was "bounced".

Ken, NU4I

----- Original Message -----
From: "Albers" <[hidden email]>
To: <[hidden email]>
Sent: Monday, May 08, 2006 9:00 AM
Subject: [Elecraft] RE: ECN


Quite a bit of QRN here, too, Kevin.

Well, here I am again in NC - spent some time Fri and Sat working on antenna
setup at our no-outside-antennas NC second home. My attempt at loading the
aluminum ridge vent came to naught (more on that another time). Current
configuration is an ATU at one end of the attic with a balun and 25 ft of
fat wire stretched out inside the attic and 25 ft of very thin black wire -
very, very hard to see - stretched outside the attic.

Was anxious to try it on ECN but at 20m net time I was still paying the bill
for a little family supper at Elmo's diner.

Fired up the KX-1 in time for the 40m net - heard Tom (about 579) tell Kevin
(about 339) about the storms. Heard W0CZ about 589 w/QSB, VE3XL about 569,
K2VCO, K4JPN, all Q5 but weaker. Heard AB8KJ 589 but a bit off freq. Tried
calling a couple of times in hope someone would hear me and relay, but no
such luck. Hope to QNI next week when I'm back in VA with a real antenna!
73
Ray K2HYD
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com 

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com