At 17:44:32 EST on Sun 24 Feb 2008 Rich Lentz (KE0X) wrote …
... The KSB2 will require J9, J10, and J11 to be installed on the K2
motherboard. Mine are still installed in the K2. They are available from
Elecraft or Digi-Key. 1 - Samtec SSW-112-01-G-S and 2 - Samtec
SSW-103-01-G-S.
--
Please note that installing the KSB2 also requires the installation of
several parts on the Front Panel board ...
o Resistor, 68.1 k, 1%, 1/4 W
o (5) Capacitors, .01 uF, 0.2" (5 mm)
o Connector, 2 x 8 pin male, .100"
o Resistor network, 10 k, 4 R, 8 pins
o Transistor, PNP, 2N3906
All of these parts are available in kit form from
http://www.unpcbs.com/ as
our KSB2 Parts kit ($6.25 + $5.50 shipping & handling). This kit also
includes the three RF board connectors Rich mentions, plus the standoff and
miscellaneous mounting hardware.
73,
Gary KI4GGX
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
