RE: K1 Backlight mod question

[wrmoore]

Never mind!  I see the white plastic is stuck to the clear plastic!  Sorry!!

73, Randy

> Subject: K1 Backlight mod question
>
>  The instructions for the K1 Backlight Mod (Step 6) say "DO
> NOT remove the thin white plastic sheets which cover both
> front and back of the backlight assembly."  When I removed
> the clear plastic film, there was no white plastic sheet
> underneath it.  There is a white plastic sheet on the other
> side which has the K and A printed on it for Cathode and
> Anode.  Is there supposed to be a white sheet on the side
> that gets stuck to the foam insulator???  If so, do I need to
> request another backlight?
>
> 73,
> Randy, KS4L
>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com