That does sound rather strange, did it fit the K2 (I you have one)?
There is a lot of depth in the K3s fitting, my connectors go 'home' before I
have to do the collar up, that is, the collar on my line sockets will slide
back up from the mating part. Screwing them on and making a good connection
isn't a problem.
Wonder if its your particular connector?
On 13/2/08 14:44, "WS6X" <
[hidden email]> sent:
> ------------------------------
>
> Original Message: 12
> Date: Wed, 13 Feb 2008 05:33:33 +0000
> From: Charles Harpole <
[hidden email]>
>
>
> K3 with Yet ANOTHER non-standard mic pin-out. Now ham radio has at least 4
> ...
>
>
>>>>>
>
> After reading several responses to Charles' earlier post, and the above from
> Charles himself, I realized that I was reading my "own" interpretation into
> his comments.
>
> My difficulty with the K3 front panel MIC connector had nothing to do with
> pin-out - that has been well documented. Mine was a mechanical problem. I
> can not "seat" the plug deeply enough to engage the screw-on collar.
>
>
> Jim, WS6X
>
>
> _______________________________________
> No viruses found in this outgoing message
> Scanned by iolo AntiVirus 1.5.1.4
>
http://www.iolo.com>
> _______________________________________________
> Elecraft mailing list
> Post to:
[hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>
http://mailman.qth.net/mailman/listinfo/elecraft>
> Help:
http://mailman.qth.net/subscribers.htm> Elecraft web page:
http://www.elecraft.com--
Being a System Administrator is like being a plumber.
If you do a good job, nobody knows. If you screw up, everybody gets covered
in s**t!
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
