Well, while waiting for a s/w install in the radio computer, I thought I'd
give this another try.
The nut did not appear loose at all - nor did I observe any slop, but I
tightened it with a nut driver anyway and the problem seems to have gone!
Thanks again to Don, and hope others find it helpful.
Regards, Joel
Joel R. Hallas
From: Joel R. Hallas [mailto:
[hidden email]]
Sent: Sunday, July 06, 2008 7:13 AM
To: '
[hidden email]'
Subject: K3: More on AF Gain delay
Thanks for the suggestion Don, but that wasn't it either. Any other
thoughts?
>Remove both knobs from the concentric shafts and see if the nut holding
>the control to the front panel has loosened. Yes, the pots are fastened
>to the board so you might not notice it at end of rotation, but a loose
>mounting nut can impart a 'squishy' feel when the knob is rotated
>because of the slight flexing.
>73,
>Don W3FPR
Regards, Joel
Joel R. Hallas
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
