Hi Don (both Don's w3fpr and n4hh)
Thanks for the reply, I have checked it again and it seems to be intermitted
(sometimes only one stopbit works, on other occasions also 2 is
working...). Strange behaviour, I will first check with some other HW/PC as
I understand you are getting well performance with both settings.
If I find something out I will come back to this reflector.
gl,
Carel, pc5m
________________________________
From:
[hidden email] [mailto:
[hidden email]] On
Behalf Of Don Nesbitt
Sent: Saturday, July 16, 2005 3:08 PM
To:
[hidden email]
Subject: Re: [N1MM] Elecraft K2 and N1MM logger serial com. (stopbit)
Carel - my K2 (#2028) with KPA100 works equally well
with either 1 or 2 stopbits selected. Using either an
old IBM 380 ED laptop or a new Compaq 2.4 ghz laptop
with N1MM (v 5.0.128).
I have not tried to see if it might be dependent on a
particular KIO2 board. I do have KIO2's in both my
qrp tops but they are not easily available for
testing. 73 es gud dxing -- Don N4HH
--- "Carel, pc5m" <
[hidden email]> wrote:
> Hi,
>
> Fired up my K2 Elecraft (#4927) with N1MM Logger
> program and found out that
> it will only work with "1" stopbit (remaining
> parameters are confirmed).
> This is in contrast to both the n1mm manual (use
> default Kenwood parameters
> of 2 stopbits) and the K2 KPA100 manual saying that
> 2 stop bits should also
> work.
>
> Also verified this behaviour with "Hyperterminal"
> only 4800 baud, 8
> databits, no parity, no hardware control and ONE
> stopbit is functioning.
>
> Don't know if more people have been seeing this, if
> yes maybe the manual(s)
> can make a note of it, if no it is just my PC
> hardware and this email can be
> discarded !
>
> 73'3
>
> Carel, pc5m
>
>
> [Non-text portions of this message have been
> removed]
>
>
____________________________________________________
Start your day with Yahoo! - make it your home page
http://www.yahoo.com/r/hs
To unsubscribe, send an email to:
[hidden email]
________________________________
YAHOO! GROUPS LINKS
* Visit your group "N1MMLogger
<
http://groups.yahoo.com/group/N1MMLogger> " on the web.
* To unsubscribe from this group, send an email to:
[hidden email]
<mailto:
[hidden email]?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<
http://docs.yahoo.com/info/terms/> .
________________________________
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
