Hi All
First let thank all the kind people that replied to my last post about the
Hi Cur warning and volume pot noise.
It really sorted me out,
I have the QRP version and have the internal battery pack, well I spent a
while chatting on 20m last night to a friend and
Didn’t give a thought to the battery, When I checked this morning with a
good shout the voltage was just over 11V and that’s when I get the HI Cur
warning, when I ran it from a nice 13.8 (well 14.4V in fact) supply it was
fine and I can reset the Hi Cur alarm to 3.5 Amps.
The Vol Pot Noise isn’t that bad, not really worth the effort to fix, if it
gets worse I will look at it but im not worrying about that yet, as the
serial number is in the 29xx range it would be pre-new board layout so im
happy now I know there is a fix if I need to take it later.
Just been using Spectrogram to check the filters and adjust them to my
likings , The K2 has had just about all the mods (except volume pot!) done,
so im a very happy camper.
Its got the K2-DI board fitted and that works very well on PSK and SSTV
Thanks Ray If your still taking the mail
All the best and I hope to work some other K2’s on the air soon!
Paul
M0BMN
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.344 / Virus Database: 267.11.9/116 - Release Date: 30/09/2005
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
