In my copy of CWGet there's an option on the Setup menu called Sound
Output. It's normally Off, but you can set it to various other options,
which include an array of DSP filters. You might also need to fiddle with
the mixer settings in case the relevant inputs or outputs are muted.
73,
--
Julian, G4ILO. (RSGB, ARRL, G-QRP, K2 #392)
G4ILO's Shack:
http://www.qsl.net/g4iloJean-François Ménard <
[hidden email]> wrote:
Hi,
This is a computer software issue. Audio software normally have an option
to
listen what your record or monitor from de line-in of your sound card. But
sometime, software do not offer it....
I have on my computer 2 softwares acting like a spectroscope.... One of
them
offer me to listen to the sound that come from the line-in with the
line-out.... from my K2.... And the other one do not offer me the same
option....
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
