Keith
I'd recommend the rework eliminator. You can find a link to it from the
bottom of the elecraft home page. It makes adding options much easier in
the future by providing missing parts to the base K2 that you don't get
until you buy the options, plus some header boards that you plug in where
the missing option boards will eventually go. With this, you don't have to
rework your basic kit when you add a board. You can also remove an option
and substitute the header board if you want to isolate a problem.
You have to order the header modules plus the missing parts. The missing
parts vary depending on which options you've included in your elecraft
order.
Rich - KE1EV
http://www.richardcarter.nt/_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
