Elecraft

REV

Classic

List

Threaded

3 messages Options

Mike K4PI

REV

When using SPLIT, and using the REV button to listen the pileup I often get disconnected from my logging program. I use DX4WIN and have tried different polling rates. It does not always happen as when I try to duplicate it I can hit REV 50 or 60 times but then when working a pile up out of the blue I will get a warning from the logging program saying it has disconnected from the K3. I use a standard serial port and not a USB to serial. The only time this ever occurs is when using the REV function. I have also had it happen when not in SPLIT, but just using the REV function. Anyone else ever run into this? 73 Mike K4PI
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

wayne burdick

Re: REV

Administrator

If you turn on a log file to capture the serial traffic, the authors of DX4WIN may be able to debug it for you.

73,
Wayne
N6KR

On Sep 15, 2014, at 4:48 PM, "Mike Greenway" <[hidden email]> wrote:

> When using SPLIT, and using the REV button to listen the pileup I often get disconnected from my logging program. I use DX4WIN and have tried different polling rates. It does not always happen as when I try to duplicate it I can hit REV 50 or 60 times but then when working a pile up out of the blue I will get a warning from the logging program saying it has disconnected from the K3. I use a standard serial port and not a USB to serial. The only time this ever occurs is when using the REV function. I have also had it happen when not in SPLIT, but just using the REV function. Anyone else ever run into this? 73 Mike K4PI
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Joe Subich, W4TV-4

Re: REV

In reply to this post by Mike K4PI

It is likely that DX4Win is polling for some item other than IF;
and is getting an '?' response while you are holding the REV
button. Looking at polling data while holding the REV button,
I see the K3 responding '?' (Busy) when receiving FA;, FB;,
IS;, FW; and several other frequency/mode related polls.

I'd guess that DX4Win does not properly handle a busy response.

73,

... Joe, W4TV

On 2014-09-15 7:48 PM, Mike Greenway wrote: