Guy's...
Getting on with the "K2 RF Board" here .....going together "much" better
than I antisipated...although I have workmen in the house here at the
moment...fitting a new bathroom suite and layout... SO..! at "times" its
hard to concentrate with all the noise...
Just wanted to enquire...
I am at the stage of the "RF Board" where one installs the "relays" onto the
RF Board,....I have located the 2 PACKETS of relays I got with my "K2"...
What I would like to clarify is....
On one of the "tubes" of relays there is a white label with the words "KAT2
Relays"....and other the other "tube" there is NO label...
As far as I can see...from the markings the relays are "exactly" the same in
nature all ways...(perhaps not..!)... Does it "matter" which ones I use for
the part in the "RF Board" that I am currently putting together..??
As for those wishing to follow my progress, slow as it has been over the
last year, with one thing and another... I will post some photographs on my
website as soon as the board is done...along with my "thoughts" on the
process....All comments would be greatly welcome...
Thanks again for the support throught this "endeavour" that I have
undertaken.... Without you guy's the process would be MUCH more dawnting...
Andy
[hidden email] "...I Just See It.!.." John A. Ross
(RSD Communications circa 2004)
A.R.S.
GM0NWI QRP "..It is vain to do with
more.... "A Dis-Orientated Kiwi...
"K2 S/n 01432 Soon To Be On-Air" what can be done with
less.. In The Northern Hemisphere..."
GQRP No.9576
QRP-L No.2165
ARCI No.10561
Alaska QRP Club No.190
Flying Pigs QRP Club No. FP#-1061
ICQ No.31899603
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
