I use Belden RG-174 from KX3 to amp. No problems on loss because it is only 2 feet long. I use an RCA male connector on each end of RG-174 & that plugs into the RCA female to BNC adapter on the KX3 side & RCA female to PL-259 adapter on KXPA100. Just leave adapters on amp & KX3 which makes a very easy hookup.
For portable use, I also use Belden RG-174, 25 feet, for the feeder to the antenna. Makes it easy to pack & a very quick disconnect if a large dog or child runs into the coax pulling the RCA connector from the rig instead of pulling the rig off the table.
73,
Reed W4JZ
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
