RF Probe

[Gary Montalbine]

Need to do some signal tracing on my K2. The xmit is not working correctly. I need either the completed RF probe or the 1N34A diode shown in the manual for troubleshooting. My local radio shack does not carry the diode. Buying online would be very costly for one diode.

I built this around the turn of the century and any accessories are long gone as well as my technical knowledge. Sounds old doesn't it.

Thanks,

Gary WA4SZI
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Gary Montalbine]

Test send.

[hidden email] wrote:
> Need to do some signal tracing on my K2. The xmit is not working correctly. I need either the completed RF probe or the 1N34A diode shown in the manual for troubleshooting. My local radio shack does not carry the diode. Buying online would be very costly for one diode.
>
> I built this around the turn of the century and any accessories are long gone as well as my technical knowledge. Sounds old doesn't it.
>
> Thanks,
>
> Gary WA4SZI
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Don Wilhelm-3]

Gary,

Elecraft offers the RFPROBE kit for $10.  That may be better than making
a special order to Mouser or other supplier - BUT, a ham who does any
building at all should be able to order a list of parts from the 'wish
list' and place a sizable order, making the shipping a small percentage
of the total cost.

73,
Don W3FPR

[hidden email] wrote:
> Need to do some signal tracing on my K2. The xmit is not working correctly. I need either the completed RF probe or the 1N34A diode shown in the manual for troubleshooting. My local radio shack does not carry the diode. Buying online would be very costly for one diode.
>
> I built this around the turn of the century and any accessories are long gone as well as my technical knowledge. Sounds old doesn't it.
>
> Thanks,
>
> Gary WA4SZI
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com