RF gain calibration - K3 Utilities

[Johnny Siu]

 Hello Elecrafters,
In the K3 utilities, there is a calibration for RF gain.  Do I need to do it per band? Or just do one calibration at 40m?
I now have a SARK-110 antenna analyzer / single generator so that I can do per band calibration if necessary.
Any advice?
73
Johnny VR2XMC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Lyle Johnson]

RF Gain Cal is only done once, not per band.

73,

Lyle KK7P

> ...In the K3 utilities, there is a calibration for RF gain.  Do I need to do it per band?

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]