Hi to the list,
Hopefully some one will confirm what I think is the RFC's.
I'm currently building the 40m receiver (RF Board stage 2) I think I
have identified the RFC's which are similar to resistors but thicker
in their body shape with the leads axially.
Like resistors they are marked with various colour bands to mark
their value with a 4 band to mark tolerance e.g. silver/gold. some of
the bodies are tan, some are green. The photo and parts list says
they should all be green. unfortunately I can't measure Inductance on
my DMM. Is there any measurement on my DMM e.g. resistance that would
indicate that these are the RFC's? I'm thinking would they have a
typical resistance possibly a low one?
I also have one separate one which has a tan body , colour markings
green red/brown green with a gold tolerance mark, similar to a 1/8
watt resistor which I believe is the sub miniature one used on the
underside of the RF Board PC for the modification near C191.
Thanks in advance.
73 Gary G7USC
Gary McKelvie
G7USC
Web : www.garym.org.uk
Mobile : +447968501863
MSN Messenger :
[hidden email]
So Long and Thanks for all the Fish
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
