RFI

[Don Rasmussen]

The MFJ-1026 will cure it. You only need a simple external antenna near the noise source. Phase that kind of noise out.


Cheers,
Don



Hi Don

I know what you were going thru as my next door neighbor has a Kenmore front-loader (made by Whirlpool, I think) and I hear the RFI on my radio and I am 200 feet away from his house and the antenna is 400 feet in the backyard from his house. Seems every 15/18KHz or so, I hear the hash noise...since I use 30m, it falls on 10.103 and 10.118 but is fairly broad so covers up weak signals.

I gave him an EMI/RFI suppressor block but that didn't even work...so I guess, the mods have to be made internally but I don't even want to go there.

Looks like the FCC is turning their backs on this one. I have a Maytag top loader with a rotary "analog" switch and sure hope it doesn't "poop out" anytime soon. Hate to dig into my stash of ham radio $$$$.

73
Tom /K1TL  [hidden email] ...
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Bill VanAlstyne W5WVO]

Tom,

So-called EMI/RFI filters are typically differential-mode devices (i.e., there
is an L/C  filter in each side of the AC line). Noise generated by switching
power supplies is, at least in my experience, usually common-mode. Differential
mode RFI filters won't do a thing for it. Get a big ferrite toroidal core (type
43 is a good mix) and wrap it fully with the AC line cord close to the machine.
You will probably find that the noise is eliminated or reduced. If it is reduced
but not eliminated, put another core in series with the first one, extending the
line cord if necessary. If your neighbor is willing to continue to help you
solve the problem, I'd try this before going to a noise phaser, which are a pain
to adjust every time you switch frequencies.

Bill W5WVO


Don Rasmussen wrote:

> The MFJ-1026 will cure it. You only need a simple external antenna
> near the noise source. Phase that kind of noise out.
>
>
> Cheers,
> Don
>
>
>
> Hi Don
>
> I know what you were going thru as my next door neighbor has a
> Kenmore front-loader (made by Whirlpool, I think) and I hear the RFI
> on my radio and I am 200 feet away from his house and the antenna is
> 400 feet in the backyard from his house. Seems every 15/18KHz or so,
> I hear the hash noise...since I use 30m, it falls on 10.103 and
> 10.118 but is fairly broad so covers up weak signals.
>
> I gave him an EMI/RFI suppressor block but that didn't even work...so
> I guess, the mods have to be made internally but I don't even want to
> go there.
>
> Looks like the FCC is turning their backs on this one. I have a
> Maytag top loader with a rotary "analog" switch and sure hope it
> doesn't "poop out" anytime soon. Hate to dig into my stash of ham
> radio $$$$.
>
> 73
> Tom /K1TL  [hidden email] ...
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html