Hi John,
In the TNC settings, you can check the box (for Elecraft Radios) that
indicates USB-Digital. This will cause the TNC to set the K3 or KX3
to DATA A mode.
There should be no changes needed to TNC module. The TNC has had this
setting since at least 2010, but only for transceivers that support an
external data mode - the K3 being one of these.
73,
matt W6NIA / NNN0UET
On Thu, 2 Jan 2014 07:33:05 -0800, you wrote:
>I use RMS Express with my K3 & KX3 and wonder if I am the only one that has a problem.
>Every time RMS Express changes the radios frequency it also changes the mode to USB.
>I have to then change it to DATA so the TX & RX equalizers are centered, PTT is selected, levels are properly set and on the K3 the rear panel connectors are selected.
>Are there others that want changes to RMS Express to correct this?
>
>John Hendricks K7JLT
>______________________________________________________________
>Elecraft mailing list
>Home:
http://mailman.qth.net/mailman/listinfo/elecraft>Help:
http://mailman.qth.net/mmfaq.htm>Post: mailto:
[hidden email]
>
>This list hosted by:
http://www.qsl.net>Please help support this email list:
http://www.qsl.net/donate.html______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
