Roger,
A cheap and dirty way to check your RS232 and the serial cable is to jumper pins 2 and 3 of the K3 end of the serial cable (after it was removed from the K3). Open up hyper terminal in Windows (start, programs, accessories, communication). Select the proper com port and make sure you are connected, then type on your keyboard. If you see what you type the com port is working.
73
Dave KD1NA
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
