> Would like to know what is needed to make the switch to FSK such that
> the K3 can be used in DATA mode instead of USB, while still using
> N1MM/FLDigi integration and an RS232 interface.
fldigi *does not support an RS-232 interface for FSK*. Look in the
fldigi help files for pFSK (pseudo FSK) and build that circuit to
convert on/off keyed audio tones to FSK.
However, *any program* capable of AFSK/PSK can be used with the K3 in
DATA mode simply by selecting DATA A (for wideband PSK and AFSK in
USB) or AFSK A (for narrow filter AFSK in LSB). See the K3 Owner's
Manual information on DATA Sub-modes.
73,
... Joe, W4TV
On 2014-09-25 11:15 AM, Robert Fanfant wrote:
> I currently have N1MM integrated with FLDigi, a SignalLink unit, and
> an RS232 interface to the K3. All works well using AFSK with the K3
> in USB mode.
>
> Can someone direct me on how to setup my K3 for FSK RTTY? Would like
> to know what is needed to make the switch to FSK such that the K3 can
> be used in DATA mode instead of USB, while still using N1MM/FLDigi
> integration and an RS232 interface.
>
> Thanks in advance.
> -rob N7QT
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
