RTTY Messages

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

RTTY Messages

Rich-4
When I used the Message buttons in SSB or CW at the end of the message
the radio automatically returns to RX, however when I send a RTTY
message the radio remains in TX.  Is there a command I can add to fix this?

I could not find anything in the manual.

Rich
K3RWN
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: RTTY Messages

Rich-4
I found it right after I sent the email.  It was a bit confusing as the
software shows IM is "|" when actually | is all that you can type in the
field.  It will not take quotes

Rich

On 1/4/2016 1:06 PM, Rich wrote:

> When I used the Message buttons in SSB or CW at the end of the message
> the radio automatically returns to RX, however when I send a RTTY
> message the radio remains in TX.  Is there a command I can add to fix
> this?
>
> I could not find anything in the manual.
>
> Rich
> K3RWN
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: RTTY Messages

Brian Hunt
In reply to this post by Rich-4
If you put the pipe character "|" at the end of the text it will drop back to receive right away. This character is not sent in CW mode in case you use the same text for both.

73,
Brian, K0DTJ
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]