This past weekend I ran my first RTTY contest
The K3 did great, I ran AFSK with MMTTY and
N1MM. I run the 500 hz roofer and Dual PB
And I didnt hear anyone outside my passband!
Actually worked so well it pissed somebody off
That was very close to my frequency! I have a
Couple of questions: I am using USB on com 4,
How can I run FSK instead does anyone have
The configuration figured out? Also it starts out with a 1 to 1.5 second diddle that needs to be made shorter to save transmission time. I never saw over 42C on the PA even when cranked it too 120 watts(nice). Mic gain was set at 10! So I need help with long beginning diddle and sure would like FSK instead of AFSK! Any ideas, Thanks much! Bill N4ZI_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
