Paul,
The ALC bars is not relevant when using FSK D (or PSK D), that is only
for soundcard driven data modes.
K3 Terminal is there for convenience, and while is does the job, it was
not intended to be a "logger", so no serial number incrementing is possible.
For FSK D, take a look at MMTTY - it can do both soundcard AFSK A and
FSK D if you build a "one transistor keying device" to 'wiggle' the FSK
IN pin on the K3 ACC connector.
73,
Don W3FPR
On 2/13/2016 10:01 AM, Peter Pauly wrote:
> I'm using the K3 Terminal and FSK D mode for the RTTY contest and am doing
> "okay" but have the following questions:
>
> 1. My ALC indicator shows 6 or 7 bars, more than I would like. Is there any
> way to adjust the output in FSK D mode?
>
> 2. In the K3 Terminal, is there any way to have an incrementing serial
> number (required in this contest)?
>
> I usually use FLDigi which has that feature with AFSK, but I'm trying to
> get the hang of FSK-D.
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html> Message delivered to
[hidden email]
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
