RTTY monitor level setting

[Steef PA2A]

The RTTY 45 Baud monitor level can 't be adjusted during receive anymore, only during transmit. Not a big problem but it has changed.

Further all my 45 Baud RTTY presets were changed into 75 Baud after sending the 4.03 firmware so I had to change them all.

73 's Steef PA2A
K2 & K3
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dave-3]

I loaded 4.05 into my k3 last week and it took me a while yesteday to work
out why it wasnt decoding 45baud rtty, mine had also changed to 75 baud rtty

With 4.0.5 I can change the monitor level on RX and TX on fsk and afsk

Dave

ww2r

> Date: Sun, 22 Aug 2010 17:29:57 +0200
> From: "Steef PA2A" <[hidden email]>
 

> Subject: [Elecraft] RTTY monitor level setting
> To: <[hidden email]>
> Message-ID: <238F35436BA54D3AB9E905973C596A8B@DELL1300>
> Content-Type: text/plain; charset="iso-8859-1"
>
> The RTTY 45 Baud monitor level can 't be adjusted during receive anymore, only during transmit. Not a big problem but it has changed.
>
> Further all my 45 Baud RTTY presets were changed into 75 Baud after sending the 4.03 firmware so I had to change them all.
>
> 73 's Steef PA2A
> K2 & K3
>

 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html