RTTY on the k3

[ANTHONY JAPHA]

I don't see a mention of the safe RTTY power output in the manual.  Seems it should be in the specs, if nowhere else.  What is it, pse?
Tnx and 73,
Tony, N2UN
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[w0mu]

100 watts

Mike W0MU

J6/W0MU November 21 - December 1 2011 CQ WW DX CW
W0MU-1 CC Cluster w0mu.net


On 10/8/2011 7:58 PM, ANTHONY JAPHA wrote:

> I don't see a mention of the safe RTTY power output in the manual.  Seems it should be in the specs, if nowhere else.  What is it, pse?
> Tnx and 73,
> Tony, N2UN
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[k6dgw]

I run my K3 at 100W on RTTY, KPA500 at 500W [except on 30m -- 200W].  
You can monitor the PA Temp in VFO B, it's an option from the DISPLAY
button.  My K3 never goes above about 57C.  I've seen the KPA500 get to
about 68C, and then I guess the fan turns up to high, can't hear it with
the cans on, and it comes right back down.

73,

Fred K6DGW

On 10/9/2011 3:38 AM, W0MU Mike Fatchett wrote:

> 100 watts
>
> Mike W0MU
>
> J6/W0MU November 21 - December 1 2011 CQ WW DX CW
> W0MU-1 CC Cluster w0mu.net
>
>
> On 10/8/2011 7:58 PM, ANTHONY JAPHA wrote:
>> I don't see a mention of the safe RTTY power output in the manual.  Seems it should be in the specs, if nowhere else.  What is it, pse?
>> Tnx and 73,
>> Tony, N2UN
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1410 / Virus Database: 1520/3943 - Release Date: 10/07/11
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html