RTTY using DATA mode on K3 (FIXED!)

[Derek Cohn/WB0TUA]

Hi Everyone,

Thanks to all the good feedback on this list, my problem is solved.  As many people pointed out, the Mark frequency in MMTTY has to match the pitch setting in the K3.  I checked the K3 (thanks to those who showed me how) and it was 2125 Hz as expected.  I checked MMTTY and it was 473 Hz (where the heck did that come from???).

I reset the value in MMTTY to 2125 and was able to print RTTY in data mode with no problem.  A few minutes later, had my first RTTY QSO with the K3.  Worked perfectly.  So, there was nothing wrong with the K3 and the only issue was the configuration of MMTTY.  I am very greatful to all of you who responded and gave me the information to solve my problem.

You guys rock!

73,

Derek Cohn
Morse Telegraph Club - Alton Chapter
Office UD, Sine DJ
Amateur Radio Station - WBØTUA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html