RX EQ comments

[Mike K2MK]

I set up the RX EQ for a boost at 400 and 800Hz for CW. I also lowered the
others which had the effect of reducing noise. The results were good. I then
listened to some SSB and realized that the equalized settings were the same
as I had set for CW. I couldn't find a way to have one group for CW and
another for SSB. It seems like there should be unique settings for the
different modes.

Mike K2MK

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Leigh L. Klotz Jr WA5ZNU]

Not to mention the effect on data modes...supposedly this is on the list.
Leigh/WA5ZNU
> I set up the RX EQ for a boost at 400 and 800Hz for CW. I also lowered
> the others which had the effect of reducing noise. The results were
> good. I then listened to some SSB and realized that the equalized
> settings were the same as I had set for CW. I couldn't find a way to
> have one group for CW and another for SSB. It seems like there should
> be unique settings for the different modes.
>
> Mike K2MK

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com