RX SELECTION

[Mike K4PI]

My K3 has the KAT3 and I am using the external PR6 via the RX ant.  On 6 M if I have the antenna on Port 2 everything works correctly as the signal goes up in strength when I select RX bringing in the PR6.  If the antenna is on Port 1 I get the opposite effect.  The signal goes down at least 4 or 5 S units when selecting RX to bring in the PR6.  Any suggestions?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Joe Subich, W4TV-4]

DIGOUT1 is saved by band *and* by antenna if one has the KAT3
installed.  Be sure it is set ON for *both* antennas on six.

73,

    ... Joe, W4TV


On 5/28/2013 8:39 AM, Mike Greenway wrote:

> My K3 has the KAT3 and I am using the external PR6 via the RX ant.  On 6 M if I have the antenna on Port 2 everything works correctly as the signal goes up in strength when I select RX bringing in the PR6.  If the antenna is on Port 1 I get the opposite effect.  The signal goes down at least 4 or 5 S units when selecting RX to bring in the PR6.  Any suggestions?
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Mike K4PI]

You hit the nail on the head.. sorry to bandwidth.. 73

From: Joe Subich, W4TV
Sent: Tuesday, May 28, 2013 8:53 AM
To: Mike Greenway
Cc: [hidden email]
Subject: Re: [Elecraft] RX SELECTION


DIGOUT1 is saved by band *and* by antenna if one has the KAT3
installed.  Be sure it is set ON for *both* antennas on six.

73,

    ... Joe, W4TV


On 5/28/2013 8:39 AM, Mike Greenway wrote:

> My K3 has the KAT3 and I am using the external PR6 via the RX ant.  On 6 M if I have the antenna on Port 2 everything works correctly as the signal goes up in strength when I select RX bringing in the PR6.  If the antenna is on Port 1 I get the opposite effect.  The signal goes down at least 4 or 5 S units when selecting RX to bring in the PR6.  Any suggestions?
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html