RX2 issue

[VANO Peter]

Gentlemen,
using button A>B the bandwith chosen in Rx A is not transferred to Rx B
and I have to go to B SET, turn slightly WIDTH knob and then Rx B jumps
to copy width Rx A.
Any help please?
TNX and 73, Peter OM7VV

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Joe Subich, W4TV-4]

Tap A>B *TWICE*.  The second tap transfers all parameters not just
frequency and mode.

73,

   ... Joe, W4TV


On 2015-02-11 7:49 AM, VANO Peter wrote:

> Gentlemen,
> using button A>B the bandwith chosen in Rx A is not transferred to Rx B
> and I have to go to B SET, turn slightly WIDTH knob and then Rx B jumps
> to copy width Rx A.
> Any help please?
> TNX and 73, Peter OM7VV
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]