RXant, NGen while tuning filters?

[Jim AB3CV]

I'm getting ready to use Spectrogram to set my filters. It would seem that
putting NGen on the RxAnt input would be a nice safe way to use it since no
transmit signal could accidentally blow it out.

Any reason that wouldn't work while setting the filters with Spectrogram?

73

jim ab3cv

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Don Wilhelm-3]

Jim,

That would work just fine - set RANT ON, and don't forget to set it OFF
again after you are finished.

The other way is to set CW TEST on (press the VOX button while in CW
mode).

73,
Don W3FPR

Jim Miller wrote:
> I'm getting ready to use Spectrogram to set my filters. It would seem that
> putting NGen on the RxAnt input would be a nice safe way to use it since no
> transmit signal could accidentally blow it out.
>
> Any reason that wouldn't work while setting the filters with Spectrogram?
>
> 73
>
> jim ab3cv
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Jim AB3CV]

good stuff!

tnx
jtm
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Brian Mury-3]

On Thu, 2007-04-12 at 09:46 -0400, Don Wilhelm wrote:
> The other way is to set CW TEST on (press the VOX button while in CW
> mode).

CW TEST on, *and* turn the power all the way down, *and* unplug the
key/paddle. Belt and suspenders! ;-)


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com