It would seem to me that new rigs today might benefit from a built infra
red or wireless CW key connection. Elecraft could then also sell as an
accessory a wireless paddles, perhaps even a wireless touch paddle. Of
course the same could be for microphones for those that are not CW only.
Jozef WB2MIC
[hidden email] wrote:
> I had been thinking about having a filter parameter memory card, where
> you could store the bandwidth/bfo figures from a number of different
> alignments and instantly recall and load them. Say you had five banks,
> you could have four bandwidths at each of five different
> sidetone/offsets. But I don't know enough about this to know why even
> this limited option (let alone continuously tracking filters) wouldn't
> be practical.
>
> 73,
> Drew
> AF2Z
>
>
> On Tue, 08 May 2007 22:21:04 +1200, "Nigel & Beryl"
> <
[hidden email]> wrote:
>
>
>> I would like to see the ability to toggle or step through say three side
>> tone settings and have the CW filters automatically track the changes.
>> On a occasions, especially when the filter is set narrow and the signal is
>> weak, the filter ringing and the background noise level can mask a
>> particular sidetone frequency. Being able to change the CW sidetone can
>> again un-mask the signal.
>>
>> 73, Nigel ZL2DF
>>
>>
>
> _______________________________________________
> Elecraft mailing list
> Post to:
[hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>
http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help:
http://mailman.qth.net/subscribers.htm> Elecraft web page:
http://www.elecraft.com>
>
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com